• Insert the electric wire into the structure [1], passing it through both ends.
• Insert the crown [3] followed by [4] and [5] into the structure [2]. Insert the plastic washer and screw in the threaded screw washer [6] without forcing.
• Insert the perforated plate [7] and then lock it with the screws [6].
• Screw the final piece [8].
• Hang the pre-assembled structure [2] with a chain using a ring [1].
• Insert the cup or bell [10] into the arm [9]. Follow the diagram and insert the elements [11], [6], and [12]. If the lamp holder is already fixed to the arm [9], proceed only with fixing the screw [11].
• Insert each arm [9] into the appropriate holes in the perforated plate [7]. Connect the electrical wires.
• Insert the metal cup [13] followed by [14] and [15]. Firmly support the cup [14] screw the end [16].
• Check the correct assembly of all elements. Insert leaves, flowers or pastorals in the appropriate holes of the perforated plate [7].
• Screw in lamps max 60 W.
• The glasses marked with an R in the packaging are spare parts to be kept carefully for any replacements.

Congratulations!! Now you can light up your room with this magnificent product.